Tips for those who set their own jet pump
The first thing you should do before installing the well or jet pump – is to measure the distance from the water to a level drain hose and make the necessary length.
Because of its high strength, light weight and resistance to moisture is best to use plastic PVC pipes with a diameter of 18-20 mm.
Hang the pump is on a nylon cord, load at break is five times greater than the weight of the jet pump.
Do not use for hanging metal cable or wire, since the vibrations caused by the jet pump, so the cable can break mounting lugs and the pump may fall into the well.
To suppress the vibration of the well jet pump (if the length of suspension is less than 10 meters) using spring-loaded suspension, which is attached to the end of the nylon cord. This suspension can be built from the medical or harness made of elastic rubber.
Mounted on the convertible jet pump can be lowered into the water, but so down to the bottom left at least 30 cm and the depth does not exceed the allowable rate for the shallow well jet pump. Make sure that the pump does not touch the walls of the well or put it on his body protective rubber ring.
From the jet pump, we can advise you on the brand Grundfos, which has established itself as a reliable, effective and proven company, which is based, is a superior quality of products. This includes greater attention to the constructive part of the design and selection of materials and manufacturing processes. A large amount of own production ensures high performance, healthy working environment and effective protection of the environment. Also in our catalog are jet pumps of domestic and US local brands (FloForce, Little Giant).
