For the pipeline in recent years using PEX tubing as they are characterized by high resistance to tearing. They are plastic, do not freeze, can not be exposed to chemicals and stray currents. PEX pipe can not be damaged by galvanic corrosion does not require insulation or extra protection, even if they are in the ground. These tubes are several times more durable than steel, and work with them twice as easy.

Brand: SKU #: Bow 588145 There are seamless, curved, square, round pipe. They are made of metal, nonferrous metal, steel, iron, metal and plastic. Due to the rapid built-up tube in New York recently become quite in demand. But if you decide to go shopping – go to the most reliable pro shop, shop assistant who can help you useful advice.

Product Description: Bow OxyPex tubing is PEX-b tubing with oxygen barrier and is commonly used in radiant heating and hydronic heating applications. Heating systems often consist of pipes, insulated with polyurethane foam. This is the most reliable pipe is highly resistant to chemical, physical, thermal stresses. Meets/exceeds U.S. ASTM F876/877 and Canadian CSA B137.5 standards. Oxygen barrier (permeability) complies with DIN 4726 standard. Also certified for use in potable (drinking) water applications. UPC listed by IAPMO. Rressure ratings: 80 psi @ 200F, 100 psi @ 180F, 160 psi @ 73F 25 year warranty by manufacturer. In the system of water currently used water and gas pipes, PEX pipe, with cement-sand exclusion. Plastic water pipes fairly reliable. Make a steel pipe of the same durable, is possible only by applying a protective coating, or added to the composition of other substances. The pipeline, which consists of plastic tubing, can serve up to 50 years. In this case, you will not have problems with corrosion or lime deposits. Applications: 1/2″ OxyPex Tubing is commonly used in the following hydronic/radiant heating projects: 1. Concrete slabs (structural) – reinforced with rebar or wire mesh, typically 4-6″ thick. 2. Concrete slabs (non-structural), a.k.a. “thin slabs” – gypsum or other thermal mass systems over subfloor. 3. Under subfloor (staple-up) and above the subfloor (“sandwich”, or sleeper-type) systems  – both with and without heat transfer plates. 4. Engineered floors and modular board systems. OxyPex tubing is secured by into grooved channels of the plywood or foam board subfloor panels. 5. Baseboard radiators. Connection Systems & Compatibility: Bow OxyPex Tubing can be installed using the following connection systems: 1. Crimp system (PEX crimp tool, PEX crimp fittings and copper crimp rings). 2. Clamp/Cinch system (PEX clamp tool, PEX crimp fittings and stainless steel clamps). 3. Push-Fit connection system (such as SharkBite). 4. Press type system. Cross-reference: Watts (RadiantPEX): PB032081-1000 Viega (ViegaPEX): 11436 Zurn (ZurnPEX): QHR3PC1000X PEX Tubing colors and packaging may vary by manufacturer.

Brand: SKU #: Bow 587410 Availability: In Stock Usually ships: within 1 business day

Product Description: Pipes for heating, the installation is usually hidden under the floor and walls. For their production using high-density polyethylene. On the diffusion of oxygen can protect the pipe with etilvinalkogolya that, in turn, removes all obstacles that may arise when using such pipes in heating installations. Often, to heating pipes can be easily distinguished from other manufacturers make them gray. Bow OxyPex tubing is PEX tubing with oxygen barrier and is commonly used in radiant heating and hydronic heating applications. Meets/exceeds U.S. ASTM F876/877 and Canadian CSA B137.5 standards. Oxygen barrier (permeability) complies with DIN 4726 standard. Also certified for use in potable (drinking) water applications. UPC listed by IAPMO. Rressure ratings: 80 psi @ 200F, 100 psi @ 180F, 160 psi @ 73F 25 year warranty by manufacturer. Applications: 1/2″ OxyPex Tubing is commonly used in the following hydronic/radiant heating projects: 1. Concrete slabs (structural) – reinforced with rebar or wire mesh, typically 4-6″ thick. 2. Concrete slabs (non-structural), a.k.a. “thin slabs” – gypsum or other thermal mass systems over subfloor. 3. Under subfloor (staple-up) and above the subfloor (“sandwich”, or sleeper-type) systems  – both with and without heat transfer plates. 4. Engineered floors and modular board systems. OxyPex tubing is secured by into grooved channels of the plywood or foam board subfloor panels. 5. Baseboard radiators. Connection Systems & Compatibility: Bow OxyPex Tubing can be installed using the following connection systems: 1. Crimp system (PEX crimp tool, PEX crimp fittings and copper crimp rings). 2. Clamp/Cinch system (PEX clamp tool, PEX crimp fittings and stainless steel clamps). 3. Push-Fit connection system (such as SharkBite). 4. Press type system. Cross-reference: Watts (RadiantPEX): PB032081-300 Viega (ViegaPEX): 11425 Zurn (ZurnPEX): QHR3PC300X PEX Tubing colors and packaging may vary by manufacturer.

Product Description:

PEX Tubing with Oxygen Barrier

---

1000ft roll of 1/2″ PEX Tubing with Oxygen Barrier for use in radiant heating systems. This product meets/exceeds ASTM F876/877, CSA B137.5, DIN 4726 standards and backed by a 25 year manufacturer warranty. Certified for use in radiant floor heating applications. UPC listed by IAPMO. PPI pressure rated at: 79psi @ 200F, 100psi @ 180F, 160psi @ 73F Weight: 62.0 lbs Box dimensions: 32″ x 32″ x 10″

Applications:

1/2″ PEX Tubing with Oxygen Barrier can be used for the following radiant heating applications:

1. Structural Concrete Slabs (Rebar or wire mesh reinforced, 4-6″ thick). Slab-On-Grade Systems (garages, warehouses), Slab-Below-Grade Systems (basements). 1/2″ PEX Tubing is secured on top of the reinforcement with wire ties, zip ties or clips.

2. Non-Structural Concrete Slabs (Non-reinforced, 1.25″-2″ thick). Gypsum or other thermal mass systems over subfloor. 1/2″ PEX Tubing is secured to the subfloor (i.e. plywood) with plastic clips, pipe clamps or other approved fastening method.

3. Below-Subfloor (Staple-up) and Above-Subfloor (“Sandwich”) Systems with and without aluminum heat transfer plates.

4. Sleeper-type systems (above subfloor) with and without heat transfer plates.

5. Engineered Subfloors and Modular Board Systems. 1/2″ PEX Tubing is secured by into grooved channels of the plywood or foam board subfloor panels.

6. Copper tube finned baseboard radiators.

Compatibility:

Everhot Oxygen Barrier PEX Tubing can be installed using either Crimp type connection system (Crimp Tool, Crimp-style PEX Fittings and Copper Crimp Rings) or Clamp/Cinch type connection system (Clamp Tool, Crimp-style PEX Fittings and Stainless Steel Clamps). Also compatible with Push-Fit connection system (such as SharkBite), Viega Press type system and Compression type PEX fittings.

This product is a replacement for:

Watts (RadiantPEX): PB032081-1000

Viega (ViegaPEX): 11436

Zurn (ZurnPEX): QHR3PC1000X

PEX Tubing colors and packaging may vary by manufacturer.

Documentation:

Technical Specifications and General Installation Recommendations

Technical Specifications for PEX Tubing w/ Oxygen Barrier

1/2″ PEX Tubing with Oxygen Barrier is the most popular size for all radiant floor heating applications due to it’s flexibility, light weight and ability to deliver large amounts of heat. According to RPA Standard Guidelines, recommended circuit length for 1/2″ PEX tubing is 250-350ft, depending on the application and type of installation.

For snow melt applications, use larger PEX tubing sizes, such as 5/8″ and 3/4″.

1/2″ PEX Tubing with Oxygen Barrier can be used for the following radiant heating applications:

1. Structural Concrete Slabs (Rebar or wire mesh reinforced, 4-6″ thick). Slab-On-Grade Systems (garages, warehouses), Slab-Below-Grade Systems (basements). 1/2″ PEX Tubing is secured on top of the reinforcement with wire ties, zip ties or clips.

2. Non-Structural Concrete Slabs (Non-reinforced, 1.25″-2″ thick). Gypsum or other thermal mass systems over subfloor. 1/2″ PEX Tubing is secured to the subfloor (i.e. plywood) with plastic clips, pipe clamps or other approved fastening method.

3. Below-Subfloor (Staple-up) and Above-Subfloor (“Sandwich”) Systems with and without aluminum heat transfer plates.

4. Sleeper-type systems (above subfloor) with and without heat transfer plates.

5. Engineered Subfloors and Modular Board Systems. 1/2″ PEX Tubing is secured by into grooved channels of the plywood or foam board subfloor panels.

6. Copper tube finned baseboard radiators.

Product Description:
Tubes – it’s probably something that lacked our distant ancestors. It is impossible to imagine a modern society, living without utilities, provision of which was only possible thanks to high-quality pipes.

Technological progress has allowed manufacturers to make pipes rather high quality products. Today, the choice of pipes in Omsk, ready to confuse the consumer, who is not sure which solution is best to take. When buying tubes should take into account all future operating conditions, for example, the climatic conditions of the terrain.

---

600ft roll of 1/2″ Oxygen Barrier PEX Tubing for use in radiant heating applications. This product meets/exceeds ASTM F876/877, CSA B137.5, DIN 4726 standards and backed by a 25 year manufacturer warranty.

Certified for use in radiant floor heating applications. UPC listed by IAPMO.

PPI pressure rated at: 79psi @ 200F, 100psi @ 180F, 160psi @ 73F

Weight: 62.0 lbs

Box dimensions: 32″ x 32″ x 10″

Applications:

1/2″ PEX Tubing with Oxygen Barrier can be used for the following radiant heating applications:

1. Structural Concrete Slabs (Rebar or wire mesh reinforced, 4-6″ thick). Slab-On-Grade Systems (garages, warehouses), Slab-Below-Grade Systems (basements). 1/2″ PEX Tubing is secured on top of the reinforcement with wire ties, zip ties or clips.

2. Non-Structural Concrete Slabs (Non-reinforced, 1.25″-2″ thick). Gypsum or other thermal mass systems over subfloor. 1/2″ PEX Tubing is secured to the subfloor (i.e. plywood) with plastic clips, pipe clamps or other approved fastening method.

3. Below-Subfloor (Staple-up) and Above-Subfloor (“Sandwich”) Systems with and without aluminum heat transfer plates.

4. Sleeper-type systems (above subfloor) with and without heat transfer plates.

5. Engineered Subfloors and Modular Board Systems. 1/2″ PEX Tubing is secured by into grooved channels of the plywood or foam board subfloor panels.

6. Copper tube finned baseboard radiators.

Click on image to enlarge

Brand: SKU #: Everhot BPR1250 Availability: Out Of Stock Usually ships: Upon availability

Product Description: One of the most interesting applications of PEX pipes is the construction of underwater tubing system. Working with PEX, unlike metal pipes, allow the full range of construction works carried out on the beach that is incomparably easier and cheaper construction. Next, the gradual sinking of the finished pipeline from PEX tubing fitted with ballast weights. 500ft roll of 1/2″ PEX Tubing with Oxygen Barrier for use in radiant heating systems. This product meets/exceeds ASTM F876/877, CSA B137.5, DIN 4726 standards and backed by a 25 year manufacturer warranty. Certified for use in radiant floor heating applications. UPC listed by IAPMO. PPI pressure rated at: 79psi @ 200F, 100psi @ 180F, 160psi @ 73F Weight: 32.0 lbs Box dimensions: 26″ x 26″ x 10″

300ft roll of 1/2″ PEX Tubing with Oxygen Barrier for use in radiant heating applications.

Increased attention to the PEX pipe, PEX tubing , PEX technical due to the fact that in recent years utilities mega-cities of different countries are increasingly focused on the use of trenchless technology promising recovery (rehabilitation) and the laying of water supply and plumbing tubing system. In this vein, using polyethylene (PEX) pipe, tube technology on Monday meet these challenges. It comes to technology gaskets, replacement, repair, and defect detection in pipes underground utilities for different purposes with minimal disturbance of the ground surface. In the best foreign practice, is now 90% of the amount of work to replace and restore sections of pipes in the underground communications made using trenchless technology.

Meets/exceeds ASTM F876/877, CSA B137.5, DIN 4726 standards.

Certified for use in radiant floor heating applications. UPC listed by IAPMO.

PPI pressure rated at: 79psi @ 200F, 100psi @ 180F, 160psi @ 73F

Packing: Box.

Brand: Application of polyethylene pipe (PEX) can significantly reduce the accident rate, the danger of contamination of drinking water and, moreover, greatly simplifies installation and allows the use of trenchless technology. Everhot APX1210 Availability: In Stock Usually ships: within 1 business day

Product Description: 1000ft roll of 1/2″ PEX-AL-PEX Tubing for use in radiant heating applications. Meets/exceeds ASTM F1281, CSA B137.10 standards. And in the construction and engineering designs are most commonly used tube shaped steel, which is made from stainless or carbon steel. Shaped tubes are different from their ordinary round cross-section of the square, teardrop or rectangular shape. Their main function can be called a structural element. They are well suited for use as a metal timber, since they have ribs. Profile pipes have become so popular for use in construction due to the fact that they have the strength in bending, thus have a small mass. This allows you to win at the cost of the whole structure. Also certified for use in domestic water applications. UPC listed by IAPMO. Pressure rated at: 80psi @ 200F, 160psi @ 140F, 200psi @ 73F. Packing: Box. Applications: 1/2″ PEX-AL-PEX Tubing is commonly used for radiant heating applications projects such as concrete slabs (wire mesh or rebar reinforced), thin slabs (non-reinforced), below the subfloor heating (staple-up), sandwich type installations (between subfloor and finished floor) and many others. Typical loop length for 1/2″ PEX-AL-PEX varies from 250ft to 350ft, depending of the application, supply temperatures, flow rates, etc. 300ft is considered standard for typical concrete slab install. Compatibility: PEX-AL-PEX tubing can be installed using compression style PEX Fittings of Press type system (fittings, sleeves and tools).

Brand: SKU #: Everhot APX1250 Availability: In Stock Usually ships: within 1 business day Think about the future of your planet! Buying polymer products, after use, do not forget to extract it from the ground and transported to designated areas for recycling.

Product Description:  Production of pipes made with hot or cold deformation. Strength of Cold-formed higher than the one that produces the technology of hot deformation. Manufacture of tubes of electric produces a valuation of the mechanical properties of the product and its chemical composition and hydraulic pressure. Electric-welded pipes are produced without treatment, with heat treatment. Moreover, heat treatment can be carried out not only the entire volume of the pipe, but also along the seam. 500ft roll of 1/2″ PEX-AL-PEX Tubing for use in radiant heating applications. Meets/exceeds ASTM F1281, CSA B137.10 standards. Also certified for use in domestic water applications. UPC listed by IAPMO. Pressure rated at: 80psi @ 200F, 160psi @ 140F, 200psi @ 73F. Packing: Box. Applications: 1/2″ PEX-AL-PEX Tubing is commonly used for radiant heating applications projects such as concrete slabs (wire mesh or rebar reinforced), thin slabs (non-reinforced), below the subfloor heating (staple-up), sandwich type installations (between subfloor and finished floor) and many others. Typical loop length for 1/2″ PEX-AL-PEX varies from 250ft to 350ft, depending of the application, supply temperatures, flow rates, etc. 300ft is considered standard for typical concrete slab install. If we talk about the metal that is used for making pipes, the most popular – it’s steel, aluminum, stainless steel. Galvanized shaped tubes are also popular and practical, as they have anti-corrosion properties and are used where necessary to combine the aesthetic appearance and resistance to adverse environmental conditions. For example, galvanized pipes are used for the erection of billboards, sports fields, the construction of masts and flagpoles. Compatibility: PEX-AL-PEX tubing can be installed using compression style PEX Fittings of Press type system (fittings, sleeves and tools).

Only qualitative tubing mechanism can make the overall plumbing system truly effective. Whether it is potable water drinking or radiant floor heating, the pipes used should be strong enough to withstand any kind of temperate situation. Seeking all these requirements, only PEX tubing is the unit found useful.

In comparison to metal pipes used in conventional supply system, the PEX tubing renders ample number of benefits to its individuals. It possesses great resistance to chlorination and corrosion. For this reason, it makes it suitable to be used for much longer time. Not only its appearance is sturdy but its installation is also simple. Only few fittings and couplings are needed for setting up entire water plumbing system with PEX. This makes its overall installation mechanism easy and simple.

Due to its robust strength and long term reliability and durability, these units have been able to make a mark in the industry of plumbing. The working phenomenon of these units makes the water supplying system suitable for long use and easy to handle. This is because it is easy to carry on any repair and maintenance work with these structures which lowers down the overall cost of the repair work. From electric floor heating, under floor heating to potable water drinking, electrical insulation work, snow melting and more, these PEX tubing are ideal units for everyone. It is possible to make use of these units in such functionality due to their highly versatile and robust nature.

A lot of emphasis has been given on technicalities and engineering of these items so that they can emerge as superior units in plumbing system. They have been given an optimal size and length so that they can be used for all kinds of phenomenon. Make use of PEX tubing and see the difference on your own.

All of the known world piping for industrial use on the material from which they are made, can be divided into two groups: metallic and nonmetallic. The main distinguishing feature of PEX  tubing – strength, non-metal – corrosion resistance and, consequently, longevity. And it is well known that the mechanical properties of steel tubing, for example, in plumbing systems and wastewater are used by only 2-4%.

As most of the first PEX tubing, which began using people most likely was a reed or wood with vygnivshey core. With their man managed to secure plumbing to his house or in the field, ie him in the right direction. It was a great discovery, because in the absence of directional movement that changes can not accumulate and the process is deprived of a single internally coherent line. At the end of the Stone Age, along with tubing made of wood began to use tubing made of clay. In the Copper Age came into use copper tubing. Appeared about 3000 BC bronze tube expanded the scope of tubing. The first cast-iron tubing were cast in 1465, they have allowed humanity to radically solve the issues of plumbing and sanitation. It should be noted this feature of tubes: they were manufactured from virtually all types of materials that are opening up to humanity.
PEX tubing made of new materials emerging with as new demands by consumers for them, or when there are certain conditions that require the use of tubular products from new materials, or other properties. For example, wood, pottery, tubing made of nonferrous metals for a long time to satisfy the demand of construction and repair. But when the increased requirements for ease of handling, there were more perfect cast iron tubing. In the first place with their help protect the plumbing and Plumbing removal. Almost 400 years a set of tubing to satisfy the needs of users. The first steel tubing appeared only in 1852 and were made from a sheet by welding. Further improvements in technology allowed the manufacture of metal-rolling seamless steel tubing. Steel tubing have always acted as a catalyst in accelerating technological progress, their application provides an opportunity to use innovative design solutions radioed mechanisms, structures. For example, with a steel tubing steam was used as a driving force in vehicles and as a source of heat. The use of steel tubing in industrial and residential construction has created more sophisticated devices for radiant heating, lighting, plumbing and sanitation. From steel tubes may be constructed a considerable length of tubing, using their high blood pressure, which is especially important for transportation of oil and gas.

PEX Tubing has become the favorite of the people all over the world. Most of the people are choosing PEX Tubing over any other available material for its obvious benefits. These tubing are very economic, environment friendly and very easy to use. If one is going to buy the material for the plumbing system of the building then this job does not end with picking up any PEX Tubing system from the market. Most of us are not aware that the PEX Tubing also comes in various types and styles. One should choose the right kind of the equipment according to the need of the house.

PEX pipes and fittings come in two different styles. The first one is slide in style and the second one is the easy style. The easy style means the crimp style. The first choice that needs to be made is of the piping. One should select the right kind of pipe material that would be apt for their condition and then later on matching fittings can be purchased.  The slide on fittings is available in two materials that are brass and plastic. The crimp style ones are also available in two styles that are brass and engineered plastic. Separate rings can also be bought to be attached later on.

The main way to connect pipelines during installation of PEX tubing – it is bonding. The process includes the following steps:

* Cleaning of bonded surfaces from severe pollution
* Removing the bevel on the tube
* Degrease surfaces
* The application of special glue for PEX tubing and connection details between themselves.

Glue for PEX tubing provides high strength adhesive compound. This is due to mutual penetration of polymer at the molecular level, the lack of deformation or thinning of the walls of the bonded parts. Glue for PEX tubing does not reduce the strength of the material of connected components (as opposed to welding).

Butt welding of PEX tubing is much cheaper, easier and takes less time than the installation of tubing from rigid materials. Welding of PEX tubing do not require heavy equipment. Butt welding of PEX tubing is completely automated. Moreover, the welding of PEX tubing is cheap and does not require additional consumables. Welded tubing made of plastic can be a team of 1-2 people. Welding of PEX tubing costing much more economical, since the consumption of electricity (or fuel), as compared with welding steel tubing is much lower. All this greatly speeds up the construction of the tubingline and reduces the cost of installation.

Company TSC offers the drainage tubing, PEX tubing and fittings for engineering systems – external and internal plumbing, heating, plumbingage and drainage systems.

We supply steel water-gas tubing – galvanized and neotsinkovannye. tubing steel water-gas are the traditional and well-established material for the creation of tubingline systems. Among the products we offer – Electrically welded steel tubing (ASTM 10704-92, 10705-80).

Here you can buy galvanized tubing, widely used in the construction of plumbing and heating, as the galvanized tubing with a high degree of reliability and durability. Galvanized tubing is much less prone to corrosion due to the injury above the zinc coating. Galvanized tubing with iron tubing forms a galvanic couple. Appears on the border between the two metals in the electrochemical potential of galvanized tubing prevents the dissolution of iron in the water. Due to this effect galvanized tubing last longer.

Also you can buy ordinary steel tube. Cost iron tubing less than galvanized. Using iron tubing justified in cases where steel tubing are protected from atmospheric moisture and precipitation.