Comments Off

By pexpipeman, 12/01/2011

These days a lot of people are opting for PEX piping. Slowly it is becoming on the best plumbing options on the market. PEX has been doing a great job by providing quality fittings to its customers. Since this system was introduced on the market, it has impressed a lot of people across the globe. The traditional and modern, both kinds of plumbing tools are available.

When it comes to piping, nothing is better than PEX piping. It fulfils all your piping needs, the materials used and the overall installation process is done smoothly, without any hassle.

If you wish to install pipes that will last longer and remain strong and intact for a good number of years then PEX tubing is the only option that can satisfy you. In fact, this is one of the best buys for you.

As far as the performance is concerned, you don’t have anything to worry about. With PEX piping, the quality can never be undermined. You can expect the complete water system to perform flawlessly. The strong materials that are used, it does the trick and makes the installation a success.

In fact, amongst the many that have been using PEX, you can seek reviews from them. The current statistics reveals that this piping system is definitely a worthwhile one. You can be certain and assured that the maintenance problems that you would otherwise face with a not so reliable system, all that can be overlooked if you opt PEX.

The maintenance is not a problem at all. One of the reasons is because of the modern design and usage of materials. If you notice, there are many who are still clinging onto the traditional systems and this is what calls for major maintenance. Therefore, with PEX piping, you don’t have to worry much; the materials used are absolutely meeting the current demands.

If you compare this piping with the regular metal pipes, you can expect resistance to freeze damage, whereas the metal pipes do not offer this. There are in fact quite a few comparisons that can help you identify why it is so important to opt for the best and the best is PEX piping.

If you have been using the regular metal piping, you must shift to PEX piping. There are many pros and cons in regards with these different kinds of piping. However, by all means PEX holds an upper edge.

Comments Off

By pexpipeman, 10/25/2011

In the present scenario people want to invest their money in most valuable products from where they can reap huge benefits. PEX Pipe is like a solution to their investment by providing huge opportunity of different applications with tremendous quality and features. PEX (Cross Linked Polyethylene) is durable, flexible and high quality plastic pipe offered for different applications. These pipes are resistant to chlorine and chemical reactions and involve less fittings, elbows, connections and metallic pipes. It provides better innovative ways to handle different applications in the most accurate, reliable and durable way.
PEX pipe is very easy to install or implement as it requires the plumbers to use long lengths without much use of elbows or other fixtures and fittings. The installers can implement the whole heating or any other system with ease after going through small training. There are some tools specially designed for effective implementation such as install connectors, tubing and other electrical equipments to check any crimps. Installers just need to bend the pipe to the required direction without using additional fixtures in the form of branch or tree arrangement. The cost of these pipes is relatively less than other plumbing material and depends upon the required design, product availability, distributors, size of the place and its applications.
Repair and maintenance cost of PEX pipe is very less because few connections are used during system installation and that too is in the form of a tree. This is only possible due to the flexibility offered otherwise it may start cracking after few months of installation like rigid pipe lines. There is no leakage thus leads to energy saving and is more economical. PEX pipe is certified and approved by various building codes under different sections. This is very beneficial for industries like petroleum refineries, sewage plants, chemical plants and gas processes where quality, strength, reliability and durability matters a lot and these pipes offer all the features.

Comments Off

By pexpipeman, 06/20/2011

Ed the Plumber: Advise on replacing old galvanized water lines that are connected to the kitchen faucet.

By ED DEL GRANDE

Q: Thanks for helping out all of us homeowners who have plumbing questions and need to be pointed in the right direction. We live in an older home and recently replaced our kitchen cabinets, countertop and sink. We especially love our new kitchen sink and faucet. Since the new sink is in the same spot as the old one, I reconnected it myself to the existing water and drain lines. Well, now it appears that my old galvanized water lines have been blocked with rust and I’m afraid they will harm our new sink and faucet. I know I’ll need a plumber, but what are some options we have to replace just the water lines going to the kitchen sink without disturbing the entire house?

— Fred, Rhode Island
A: Aside from the rust that can harm your new sink and faucet, remember that most kitchen sinks are the main supply of drinking water for a home. So, have your water tested as soon as possible. Once your water-quality issue has been addressed, here are three additional points to discuss with your plumber before starting the job.

First, decide on the type of material you would like to use for the new dedicated water lines that will supply water to the kitchen sink. Copper, CPVC and PEX piping are popular replacement pipe choices for older systems. PEX is long, flexible piping that uses very few fittings. If your codes allow it, PEX can make replacement piping work on older plumbing systems a little easier.

Second, choose the proper “tap in” location for the new sink lines to your existing house system. For the cold-water line, get as close to the water meter or well tank as possible. For the hot line, as close to the water-heater outlet as possible.

Third, look at installing small inline water filters under the sink as a last line of defense to capture any remaining rust and other debris before they get to your kitchen faucet.

If you address these areas of concern, this can help in reducing installation costs while also improving your kitchen sink’s water quality.

Bottom line: Your goal is to save some green and keep your water clean.

Source: http://seattletimes.nwsource.com/html/homegarden/2015353377_plumber18.html

Comments Off

By pexpipeman, 11/19/2010

Developed in United States, PEX piping is an abbreviated name for cross linked polyethylene. This is a strong tubing unit that possesses great resistance to adverse climatic conditions of cold and hot temperatures.

A chemical reaction is carried between polyethylenes so that strong, flexible and great resistance tubing can be formulated. The primary concern of PEX piping is to be used in water supply systems. This is because of its great resistance to temperature and high chemical resistance that makes it a perfect unit to be used in all kinds of plumbing applications. Due to its strong strength, the tubing can be used in residential or commercial plumbing mechanisms. In addition, it is also useful to be used in rigid and extreme temperature conditions as well as in radiant flooring application, electronic hydraulic heating system and more similar uses.

The robust yet flexible structure of these tubing has been designed by experts to be used in indoor and underground applications. It can’t be used at places of direct sun exposure as that can harm its structure build up. Despite of this, it has great shelf life. With great resistance to rusting up and less prone towards corrosion from acidic water, these PEX piping units have longer life. People can therefore use it for long time without need of any repair or maintenance. It is also great to be used in places with continuous temperature changes. Installation is also simple for these units. With an easy to operate and use tool kit, it is quite simple to install these items in any type of water plumbing mechanism.

Not only the external structure but even the internal unit of PEX piping is smooth and flexible which makes the water supplied through them free from all kinds of noise. There is no clanging similar to normal copper tubing which is why these are the best units to be used.

Comments Off

By pexpipeman, 10/11/2010

All of the known world piping for industrial use on the material from which they are made, can be divided into two groups: metallic and nonmetallic. The main distinguishing feature of PEX  tubing – strength, non-metal – corrosion resistance and, consequently, longevity. And it is well known that the mechanical properties of steel tubing, for example, in plumbing systems and wastewater are used by only 2-4%.

As most of the first PEX tubing, which began using people most likely was a reed or wood with vygnivshey core. With their man managed to secure plumbing to his house or in the field, ie him in the right direction. It was a great discovery, because in the absence of directional movement that changes can not accumulate and the process is deprived of a single internally coherent line. At the end of the Stone Age, along with tubing made of wood began to use tubing made of clay. In the Copper Age came into use copper tubing. Appeared about 3000 BC bronze tube expanded the scope of tubing. The first cast-iron tubing were cast in 1465, they have allowed humanity to radically solve the issues of plumbing and sanitation. It should be noted this feature of tubes: they were manufactured from virtually all types of materials that are opening up to humanity.
PEX tubing made of new materials emerging with as new demands by consumers for them, or when there are certain conditions that require the use of tubular products from new materials, or other properties. For example, wood, pottery, tubing made of nonferrous metals for a long time to satisfy the demand of construction and repair. But when the increased requirements for ease of handling, there were more perfect cast iron tubing. In the first place with their help protect the plumbing and Plumbing removal. Almost 400 years a set of tubing to satisfy the needs of users. The first steel tubing appeared only in 1852 and were made from a sheet by welding. Further improvements in technology allowed the manufacture of metal-rolling seamless steel tubing. Steel tubing have always acted as a catalyst in accelerating technological progress, their application provides an opportunity to use innovative design solutions radioed mechanisms, structures. For example, with a steel tubing steam was used as a driving force in vehicles and as a source of heat. The use of steel tubing in industrial and residential construction has created more sophisticated devices for radiant heating, lighting, plumbing and sanitation. From steel tubes may be constructed a considerable length of tubing, using their high blood pressure, which is especially important for transportation of oil and gas.

Comments Off

By pexpipeman, 08/05/2010

Installation of PEX tubing in Canada

PEX tubing – a new qualitative step in the history of tubing systems. Nowadays, to replace steel and cast

iron piping systems comes from polymeric materials as a more convenient and reliable. PEX tubing are durable,

comfortable, have a low weight and low cost. Plastic piping is much more economical, more profitable and more

convenient “metallic”. PEX tubing are widely used in plumbing systems, heating, plumbingage, tubinglines,

where the steel and cast iron tubing without appropriate additives or protective coatings do not meet such

criteria of quality, reliability and durability. PEX tubing and fittings are widely used in hospitals,

hotels, residential and administrative buildings, schools and industrial plants.
PEX tubing, or as we call, the tubingline of PE, can significantly reduce the accident rate, the danger of

contamination of drinking water and, moreover, greatly facilitates installation and allows the use of

trenchless technology.

http://www.warmfloorcenter.com/pex-pipe.html