Comments Off

By pexpipeman, 05/25/2011

So that you can put in a pex plumbing fittings, here are a few tricks and tips to do the job perfect. To start with, purchase high quality products, for instance zurn pex fittings.
Zurn pex fittings are tougher and more effective with respect to all kind of plumbing products besides pex pipe fitting items. The PEX supplies bought are generally created from copper or brass so they setback pretty good.
For any fixture running properly, you will find rules about tighten for the pex plumbing fittings. Some people imagine that the tighter the installation the more suitable it’s and water will never leak. But situations are more or less not so. The affixing mechanism deteriorates in the fixture, and this will finally let water to leak through it. In the event the fixture does not crack, the second scenario is incredibly going to appear.
To the pipe for being mounted the right way in to the fixture, make sure you got the proper size water pipe and fixture. Just before attaching the fixture towards the water pipe, check to see in case the fixture and pipe are thoroughly clean. I suggest you start growing manually first, until tighten the fixture stop being possible. Make specialized tool for make tighter the pipe fitting and gradually tight it twice. This needs to be more than enough to obtain a fixture installed accurately.
Additionally, in the event the fixture will not be meant for a sink or maybe a tub, and is also a significantly larger sized fixture, it will eventually only be needed to tight it about once. So the larger the fixture the less pressure should be applied to it.
If you cannot understand how to properly put in a PEX tubing for virtually any style of plumbing, it’s always best to require assistance and steer clear of destroying your entire plumbing program.

Comments Off

By pexpipeman, 02/18/2011

The growing needs of comfortable homes and cozy environments are encouraging the use of various heat radiant systems. These heat radiant systems are not only used to keep the warmth of homes but this application is also being widely accepted in various heat radiant systems like the furnaces, snow melt systems, sub floorings and many other. The current trends of advancements reveal the use of various PEX tubing and PEX fitting in the most heat systems.

Why PEX fitting?

PEX is material that is highly cross linked, it is made up of the polyethylene polymer and due to its polymeric nature it is extensively flexible. This is why most of the heat radiant systems are making use of this material as they can be molded into multiple ways. The PEX fitting are a mode to connect the various PEX tunings, pipes in various water plumbing systems.
The flexible pipes and fittings are not brittle at cold temperature, so they do not break and pose less or no chances of leakage. These kinds of fittings along with their flexibility factor are easier and convenient to be used and they can be easily be used to connect various pipes.
There are two types of fittings one is the PEX crimp style and the other one is PEX slide on type. The former one with crimp rings is easy however the latter one is even easier for connecting various tubes and pipes. While applying the Crimp ring fittings one just need to cut their tube in square fashion then insert the barb completely into the tubing and finally sliding the ring over the top.
The various PEX fittings are an aid for various plumbing systems for water which can be used for both homes and business purpose.

Comments Off

By pexpipeman, 11/19/2010

PVC fittings or poly vinyl chloride units are items that are used with PEX tubing in numerous plumbing systems. Traditionally, there were items made with copper used in any kind of plumbing system, but to overcome their limitations, now items made with PVC are used.

Just like any PEX fitting, these units are also inclusive of other pieces also such as elbows, couplings and tees. Although they are similar in appearance to PEX fittings but there is one difference that they are made up with PVC. This is a plastic like material that possesses high resistance to breakages and leakages which is why it is used in all kinds of applications that require great strength and long lasting durability. For this reason, it is used for making all kinds of PVC fittings that can be used along with tubing and piping systems.

Mainly couplings, tees and elbows are considered as fittings that are used in carrying out the plumbing systems. They are used as fittings to join two or more connections or to extend a single pipe line to the requisite length. This helps in supplying water to the desired location. In addition to this, the PVC fittings are also units to be used for increasing efficiency of a water plumbing mechanism. They are robust yet compatible units that can be installed with ease. It is also easy to supply water through them without any kind of noise, thereby improving the overall working of the water supply system.

PVC is considered as one of the finest material to be used in water supply systems after PEX. It is not only robust and strong like it but it is also flexible and can be used for any kind of water supply system. Best thing is to make use of PVC fittings and PEX tubing in a single system so as to make it more strong and versatile.

Comments Off

By pexpipeman, 08/07/2010

PEX fittings are used in systems of cold drinking water and industrial plumbing and pressure plumbings. PEX fittings are supplied with PEX or individual order.

To produce PEX fittings used low-pressure PEX. Material meets Canadian and international standards required for products intended for supply. PEX of low pressure is very strong.

Fittings HDPE and HDPE are lightweight compared to trubmi of traditsidnnyh materials. They are simple and easy to transport, during loading and unloading and the installation of piping systems.

We offer:

* Welded and termopressovannye fittings for butt welding of PE 80, PE100
* Fittings with mortgages electric heater PEX PLASSON water-gas

We produce fittings and fittings to customer’s drawings with diameters ranging from 110 to 1000 mm in the shortest possible time

Comments Off

By pexpipeman, 08/06/2010

Company TSC offers the drainage tubing, PEX tubing and fittings for engineering systems – external and internal plumbing, heating, plumbingage and drainage systems.

We supply steel water-gas tubing – galvanized and neotsinkovannye. tubing steel water-gas are the traditional and well-established material for the creation of tubingline systems. Among the products we offer – Electrically welded steel tubing (ASTM 10704-92, 10705-80).

Here you can buy galvanized tubing, widely used in the construction of plumbing and heating, as the galvanized tubing with a high degree of reliability and durability. Galvanized tubing is much less prone to corrosion due to the injury above the zinc coating. Galvanized tubing with iron tubing forms a galvanic couple. Appears on the border between the two metals in the electrochemical potential of galvanized tubing prevents the dissolution of iron in the water. Due to this effect galvanized tubing last longer.

Also you can buy ordinary steel tube. Cost iron tubing less than galvanized. Using iron tubing justified in cases where steel tubing are protected from atmospheric moisture and precipitation.

Comments Off

By pexpipeman, 07/22/2010

PEX fittings are very common among the plumbers and fitters in various parts of the world. The pipe fittings and tubing fittings have stormed their way into the plumbing and radiant heating applications with a bang. Thanks to various useful features of the cross-linked polyethylene known as PEX in short, which have helped various plumbers and fitters to tackle more complex water projects with great ease. Cross linking is a process which occurs between various chains of the polyethylene polymers.

The PEX extruded from polyethylene cross linking is tensile, strong and unbreakable under low temperatures. This is the reason that these fittings are able to survive adverse fluid temperatures where most of its competitors fail to survive for one reason or the other. Copper fittings are good enough but they easily fall prey to corroding in water plumbing applications unlike PEX tubing fittings. The brass fittings have similar kind of problems. The rigid plastic fittings show cracks when applied in chilled water systems. Hence, PEX fittings emerge as a complete solution for various radiant heating systems and cold water applications.

The pipe fittings have been in use since decades, especially in European countries. PEX tubing fittings and pipe fittings are replacing the traditional fittings very quickly. There are several features which make these fittings best for domestic applications as well as for commercial use. Here are some of the most distinguishing features of such tubing fittings:

• PEX fittings are stretchable which means they can expand and contract according to the temperatures instead of cracking or breaking unlike rigid plastic fittings.
• Pipe fittings and tubing fittings are very flexible. Buyers can take an idea from the fact that they can be molded to 90 degree angles without any crack. This is very useful feature of these fittings.
• The PEX tubing fittings are easy to make connections with PEX fittings and PEX manifolds.
• PEX fittings include lesser number of joints which means there are fewer water leakages in the fittings. This helps customers in saving lot of money by avoiding any maintenance on the plumbing systems.
• PEX piping is easy to install. It can be installed with minimum labor.

PEX is gaining the trust of more and more plumbers and fitters as this material is working effectively in various water applications over the years.

Comments Off

By pexpipeman, 07/19/2010

The durability and flexibility of PEX tubing crafted with high density cross linked polyethylene material (HDPE) coupled together with PEX fittings provides numerous advantages in plumbing applications over other materials. These fittings and tubes do not get corroded or react with toxins and can outstandingly withstand extreme hot and cold temperature. These fittings are not at all brittle, easy to install and offer increased cost effectiveness.

They can also be termed as PEX tube fittings and pipe fittings. Even in extreme cold temperatures, these fittings and tubing retain their flexibility and do not break or leak. Distinguished from metal pipes, such fittings and tubes do not corrode and develop scale because of their immense flexibility and exceptional strength. Since, materials made up of PEX do not conduct heat and other toxic substances, so they can be safely used for diverse applications. Due to these beneficial aspects, these units are widely used in varied applications like electrical insulation, refrigerant, ice rinks, concrete slab’s preparation, radiant floor heating and snow melting.

Comments Off

By pexpipeman, 07/16/2010

For each type of pipe PEX fittings provide relevant: for sewer systems from PVC using PVC fittings, for pressure systems from the PP used brass PEX fittings. Assembling these types of PEX fittings mainly differs from the metal, as occurs with the help of welding machines.

All PEX fittings, their types must meet the sanitary requirements and standards that are adopted for these devices.

If you followed all the rules of operation, then Metal PEX fittings are used for a long time, reducing the risk of accidents to a minimum, because they have excellent corrosion resistance, strength characteristics of the store.

Installation of pipes, including metal, if it is carried out using components such as metal-PEX fittings, high-tech, takes at least time-consuming professionals.

PEX fittings of each type on the market in a very large assortment. The cost of the PEX fittings on the market is acceptable, is not high, commensurate with their quality.

During production, all metal-PEX fittings are quality control, so getting them can be asked about the presence of relevant certificates. Manufacturing PEX fittings involved a large number of both domestic and foreign manufacturers

For each type of pipe PEX fittings provide relevant: for sewer systems from PVC using PVC fittings, for pressure systems from the PP used  PEX fittings. Assembling these types of PEX fittings mainly differs from the metal, as occurs with the help of welding machines.

All PEX fittings, their types must meet the sanitary requirements and standards that are adopted for these devices.

If you followed all the rules of operation, then brass PEX fittings are used for a long time, reducing the risk of accidents to a minimum, because they have excellent corrosion resistance, strength characteristics of the store.

Installation of pipes, including metal, if it is carried out using components such as metal-PEX fittings, high-tech, takes at least time-consuming professionals.

PEX fittings of each type on the market in a very large assortment. The cost of the PEX fittings on the market is acceptable, is not high, commensurate with their quality.

During production, all metal-PEX fittings are quality control, so getting them can be asked about the presence of relevant certificates. Manufacturing PEX fittings involved a large number of both domestic and foreign manufacturers.

Comments Off

By pexpipeman, 07/05/2010

PEX plumbing tubing and PEX fittings to it is a versatile material that can be used even for laying underground. PEX plumbing tubing and fittings to it have a long lifetime – guaranteed term of 50 years. What is important, HDPE tubing and fittings thereto are highly resistant to various chemical influences, and corrosion resistant in an aggressive environment.

The most popular are the tubing for plumbing and sanitation. We call them conditionally – “sewer tubing and fittings of PE. This system of communication for us invisible, we see them only in emergency situations. The main difference from the steel “predecessors” is that the tubing and fittings, sewer PE, easy to install, reduce the risk of accidents, durable and easy to maintain.

Comments Off

By pexpipeman, 07/01/2010

PEX tubing and fittings (PAP) are made from high-density PEX. The material possesses high strength and very convenient for device communications systems. PEX tubing and fittings comply with Canadian and international standards required for products designed for plumbing. HDPE tubing and fittings are light weight compared to trumpets of traditional materials. It should be noted that during transportation, during loading and unloading and the installation of piping systems PEX tubing fittings are very simple and convenient.
The company “BOW fittings” cooperates with the largest plant BOW, which produces PEX tubing fittings, in particular – tubing and fittings, sewerage and plumbing PEX. PEX tubing and fittings plant BOW – a guaranteed quality products for you and your business.

Another manufacturer of tubing, which cooperates Kulon 2 “is the company OxyPEX specializes in the manufacture of integrated drainage systems from PVC. The company also offers HDPE, fittings for them.
HDPE tubing and fittings are increasingly used to replace water systems.

Comments Off

By pexpipeman, 06/16/2010

Diameter of nominal bore (Dy) – nominal internal diameter of the PEX tubing, which is installed PEX fittings. Different types of reinforcement are the same diameter nominal bore have different flow areas.

Nominal pressure – the maximum operating pressure at 20 ° C, at which the long-term operation of  Taco heating valves and connecting parts of PEX tubing.

Operating temperature – the highest long-term temperature pumped through a PEX pipe environment (excluding short-term increases in temperature, acceptable technical conditions).

Operating pressure – the maximum overpressure at which the long-term operation of  Taco heating valves and connecting parts of PEX tube at operating temperature ongoing protection.

Pressure test – too much pressure at which the Taco heating valves and fittings of the piping shall be hydraulically tested for strength and permeability of the material body parts of at or below 5 ° C and not above 70 ° C, if the normative and technical documentation is not specified the exact meaning of this temperature .

Boundary deviation values test pressure should not exceed 15%.

Comments Off

By pexpipeman, 06/08/2010

Installation of mechanical repair linings. Land of the pipeline, partially exposed to damage, for example, bucket, can be presented in serviceable condition through repair the linings of stainless steel (Fig. 2). Depending on the diameter of the pipe at the disposal of the consumer are solid and composite structures. Editing by tightening the screws. It is important to note that the length of the repair pads should be sufficient (especially in PEX pipe for plumbing), in order to avoid the possibility of the spread of the material in place of impulse. Sealing is carried out using a specially developed sealing profile canvas.

Comments Off

By pexpipeman, 05/16/2010

The advantages of PEX and a wide range of polymer materials with different properties can be used in municipal systems.

In the PEX radiant heating systems of buildings are mainly used tubes of heat-resistant PEX for laying of pipelines (PEX fittings).

In the systems of hot and cold water units polymeric materials used for manufacturing stand-(toilet valves, float valves, mixers, etc.) and pipeline (Taco mixing valves: Taco 5002, Taco 5003, Taco 5004, heating valves, Taco zone valves: Taco 555-050RP, Taco 570, Taco 571, Taco 572, Taco 573 etc.), Taco Heat valves, internal internal and international networks, expansion tanks (Amtrol Extrol), water meters.

In the systems of wastewater (sewage) buildings polymers used for the manufacture of sanitary equipment (bath tubs, basins, sinks and toilet tanks, etc.), sanitation units, cabins, water trap (siphon), laying of internal and external sewerage, drainage networks.

Comments Off

By pexpipeman, 05/14/2010

For systems of industrial and drinking water can be used PEX pipe and PEX fittings only materials approved by the sanitary-epidemiological control for use in drinking water and having a hygiene certificate.

In the selection of PEX tube for the technological systems utilities (dry cleaning, laundry, water treatment plants) need to check the pipe for stability to aggressive environments.

Do not use plumbing PEX pipe in the fire of buildings, systems, transporting extremely dangerous, toxic, explosive liquids, liquefied hydrocarbons, and substances to which the PEX does not stand.

In conducting techno-economic comparison of options to systems with piping and equipment from a variety of materials should take into account not only the capital cost of installation of systems using PEX pipe, but also consider the possible reduction in operating costs over the entire period of operation systems, which constitutes the bulk of long-term (more than 50 years) the life cycle of infrastructure systems.