Comments Off

By pexpipeman, 04/15/2013

Nobody can deny this fact that cold weather can affect skin and usual activities of human beings. Therefore, floor heating systems have gained high popularity in recent times. These systems have become uttermost priority and these are highly beneficial for those want to keep family members away from severe cold. Whether it is kitchen, living area, bathroom or bedroom, underfloor heating systems can be installed in all portions of abode. Through electricity, pads and electric cables beneath the floor are heated up.

Fitting of mats under flooring give favorable results as mats are especially designed for electric floor heating. Electric radiant floor has more usage and flexible approach. Electric floor heating systems are also energy efficient. Electric systems or dry under floor systems include basic heating cables. An individual must have appropriate arrangement to safeguard his loved ones from chilly winter days and shivering colds. Under floor heating systems are normally of two types. First uses warm water and other uses electricity to get floors warmed. System which uses electricity is the first choice of customers as its installation criteria is less complicated. Only electrical wires are needed to be installed under floors and electric floor heating systems are secure to use in kitchen and bathroom where most of the time floors are wet. Specifically in corporate offices, electric heating systems are preferred. There is no chance of high electricity bills if someone uses electric floor heating system.

Online stores and so many corporations offer high quality of electric floor heating systems and you should be smart enough to choose which corporation can be trusted and which should be not. With help of electric hearing systems, people no longer need to be afraid while moving with bare feet on floor rather they can enjoy warm floors during winters.

Comments Off

By pexpipeman, 05/28/2012

Selecting an ideal heating solution for homes or offices is daunting task. This is because of presence too many types of floor heating systems. With wide options of such heating systems in market, finding a perfect option is difficult but the wise decision is to go with floor heating mats. Most individuals prefer using these mats instead of heating blowers or dryers because of high level of performance offered by it. These mats are efficient in providing warmness to rooms without use of too much amount of electricity. They help users to secure cozy rooms without drying air or moisture of rooms.

]
There are distinct types of these mats obtainable in market. All these mats vary in features possessed by them and brand by which they have been designed. In order to find out most suitable electric heating mat for homes or offices, individuals must check for thickness of mats. Usually, the mats with thin size are able to provide excellent outcomes to users. In addition to this, people must also look for level of flexibility and compatibility that is being owned by these mats. The homeowners must therefore go for buying floor heating mats that are thin sized and possess excellent flexibility level.
In order to make it convenient for users to hold complete warmness in entire area where they are being installed, users can acquire heated  floors in different sizes and shapes. The floor heating mats are obtainable in rectangular, square or even irregular forms in order to meet warm temperature requirement of every room. The distinct shape levels even make it easier for users to install these mats and cover every corner of a room. Individuals can even go for conducting a short survey before buying these mats in order to secure best option for their houses.
The floor heating mats are excellent way to hold warm spaces with full ease.

Comments Off

By pexpipeman, 03/29/2012

For those who quest for indirect water heaters that offer high performance at very low cost, the indirect water heaters are a smarter solution. Crafted with high quality materials and integrated with excellent features, these are wonderful water heaters that can effectively meet hot water supply requirements of small to large family homes. Water is heated within these systems through boilers or steam. The high performance level and brilliant energy efficiency makes them most suitable water heaters for residential as well as commercial use.
These units are based on indirect fired technology that makes them best to heat water while saving large volume of fuel and energy. Tailor-made insulation mechanism is infused within these systems in order to keep the hot water at high temperatures until it is being used. Even the loss of hot water temperature is very less that thereby saves up to 60% fuel. In addition to this, the indirect water heaters are designed with tankless coils. For this reason, it is possible for users to hold uninterrupted supply of hot water. There is a unique inner thin sheet designed within the heaters which provides them with excellent resistance to corrosion. There is even no additional anode rod, burner of flue. So, the water heaters are excellently long lasting and make the water supplied through it totally clean.
With high capacity to heat water with ease, it becomes very convenient for users to hold uninterrupted supply of hot water. These heaters are highly powerful and can heat almost 240 gallons of water per time. There is even no requirement of supplying oil or gas or any other fuel to make these hydroponic heating systems operate excellently. The Amtrol Boilermate indirect water heaters are definitely excellent indirect heating units that make homeowners to hold hot water for 24 x 7.

Comments Off

By pexpipeman, 03/28/2012

The mechanism of underfloor heating is used to warm up spaces in both residential and commercial regions under extreme winter situations. There are various ways with which the process of underfloor heating can be carried on. One such way is warming up spaces with use of electric floor heating mats that are crafted specifically to be installed under floor areas of different types of floors so as to warm up spaces with ease. These cables are excellent to use and can be installed under floor areas made with wood, veneer, ceramic, concrete slabs or more.
These cables use either electricity or liquids which are being supplied through them in order to generate heat. Liquids or electricity are supplied through these cables at required temperature level in order to produce adequate amount of heat. This heat is then transferred to floor level thereby warming up overall space of a room. The Floor heating cable is designed with high quality materials that make it durable. These are excellently robust units that can easily withstand high temperature level. In addition to this, these cables are integrated with twin conductor mechanism that makes them provide superior performance level to users at energy efficient means.
The best part about these cables is that they are very cheaply available. The low cost of these cables make it the best alternate to other underfloor heating systems. The availability of flooring cables in distinct sizes provides easy installation mechanism for both large and small areas. The overall volume of energy consumed by these units is very low while the performance delivered is outstanding. Moreover, the cable is waterproof and can be installed even in wet areas like kitchen, bathrooms, laundry rooms or more.
The electric radiant heating can be therefore installed by homeowners in order to secure warm and comfortable temperature level even during chilly winters.

Comments Off

By pexpipeman, 12/16/2011

Radiant energy clearly exhibits great strength as an energy source. Daily lives of people are touched effectively by this energy form, be it while conversing on their cell phones or listening to radios. With the growing scope of its usage, and also the fact that it is derived from a source that is never going to be depleted, radiant heating energy is going to be the buzzword in energy generation in the very near future.
Many people till date might not be aware fully about this form of energy. Radiant heating can be deemed the only form that makes use of electromagnetic waves for energy generation, specifically it’s an energy form invisible to eyes.
Being such a commonly available form, therefore, the question that is asked is how radiant energy is used for solving our energy requirements at homes? For using it as a power source in our homes, we need to be armed with a special generator that could fully use the electromagnetic force and convert the same into energy. This generator is termed Radiant energy generator. Wind power, solar power or any other such waves within the atmosphere can be made use of by these generators for conversion into electricity.
Its main usage these days in our homes is restricted mostly to floor heating systems; however the huge potential that this form of energy possesses has been identified. There is continuous activity on the R & D front to find out how we can further use this energy form in our day-to-day usage. This is mainly driven due to two main factors – depletion of conventional energy sources and the vast availability of the source for this energy form, along with its cost-effective nature.
Radiant heating supply has already made certain impacts in our daily lives – we might not be fully aware of the extent. However, this is going to be the key energy source that has to be used for meeting all our future energy requirements.

Comments Off

By pexpipeman, 12/16/2011

Heat exchangers are the sub devices used for exchanging the heat, as its names suggests. It transfers the heat efficiently from one medium to another. Heat exchangers are generally used in all the devices which can control temperature and humidity of a proper volume space. For example, these are used in chemical and power plants, natural gas processing, in refrigeration, air conditioning or you can say in HVAC industries.

There are many types of heat exchangers depending upon the shells, tubes, wheels, plates and fluid used in them. Few of them are:

Adiabatic wheel type: This type of heat exchanger uses a transitional fluid or solid to store the heat and has the capability of absorbing the heat. Further, the heat stored in transitional state’s fluid or solid moves to the other side of heat exchanger for releasing it.
Examples: Cold fluid adiabatic wheels heat exchangers have a large wheel that consists of threads and these fine threads are rotated by heat.

Plate fin type:  This type of exchangers has the passages which are sandwiched in between. And passages consist of fins. These fins are responsible for more efficiency. The fins have several shapes like offset fin, wavy fins and straight fins.

The fins and plates need to have higher heat transfer rate, so they are made up of metal alloys such as aluminum which makes them more effective.
High heat transmission, resisting extreme pressure, huge amount of heat transfer and lighter in weight are a few advantages of plate fin type heat exchangers.

Shell and tube: This type of heat exchangers contains sequences of PEX tubes or pipe like bodies.  And these tubes are filled with fluid which acts as heat transferring medium. The other tubes used in this may have some different fluid. The second fluid surrounds the tubes which are facing the thermal conditions such as cooling or heating.

Main advantage of this type of heat exchangers is that they can resist very high pressure, around or more than 30 bars. The shape of this heat exchanger is also responsible for resisting high pressure.

Plate type: This is further divided into categories depending upon the number of plates and their gaps between each other. Plate type heat exchangers are used widely in HVAC applications. These are also called as Plate and Frame type heat exchangers. The plate’s arrangements such as number of plates and gap in between them are interrelated with the efficiency of heat absorbing and transferring.

Fluid type: This is the most widely used type of heat exchangers. These are more economical than others. Espresso machines are the most common, which use this type of heat exchangers. In fluid heat exchanger’s process, two simultaneously process are held which improves its working efficiency.

Spiral type: As the name suggests, the shape of these types of heat exchangers is spiral or helical because they look like coils and have different sheets. Whole heat exchanger is divided into channels in which few channels act as reservoir of fluid which exchanges the heat.

Comments Off

By pexpipeman, 12/02/2011

Kickspace heaters are relatively small heaters that can be installed in places that the normally used baseboard heaters cannot reach. The naming has been done because of its ability to fit into very small spaces like the cabinet in your bathroom, small spaces underneath the kitchen or any other similar small spaces that are deprived of heating normally. These heaters, irrespective of the fact that they are smaller in size, deliver creditable performances. The Kickspace heaters are available in two variants – The Electric ones that get connected to the electrical supply and Hydronic (water powered) models that are connectible to the boiler system in your homes and the electric supply. The heaters, with their reach almost anywhere within the household, prove a useful asset in keeping you warm.

Ease of Installation:

These heaters are easily installable; you do not need a diploma in electrical engineering to have the same installed at your home. All you need are basic tools that are usually found in every home and some basic knowledge of electrical appliances. If you have them, the heaters can be easily installed by following the installation guide that accompanies such devices.

Versatility of usage:

The usage of these heaters is generally restricted to your homes, but in certain situations they have been found useful in business operations too. If your nature of work requires you to work within a small confined space, like ticket counters or tool booths, then this heater can prove a more than useful asset for keeping the place warm.

Features:

There have been loads of features that these heaters are found to have; prominent among them are the in-built thermostats on them that gives you the luxury of choosing the temperature at which it has to operate. It is not only powerful (1500 Wattage) and durable but look stylish in their white color grilles.

With nano-technology emphasizing on everything in small sizes, Kickspace heaters indeed seem to be a boon of new technology!

Kickspace heaters as best helper your main heat system

Comments Off

By pexpipeman, 12/02/2011

There are many different heating supplies that contribute together to the increase in comfort and warmth of our interiors. They all make our live more comfortable. These include taco pumps, fire surrounds, hot water cylinders and countless other products. We do not even realize their presence and importance until there is a breakdown in the services of these products. When we use good quality products, they help us in many different ways that we do not even realize. However, if we use poor quality products, they can make things really tough for us. Therefore, I is always important that we install the best quality products anywhere we want them.

There are many factors that make a heating supply effective. The most important thing to consider while buying heating supplies is the quality. You ca get many benefits with the good quality supplies. Even if you spend more amounts on their purchase, you can save money while you use them.

It is always good to save some extra money. If the heating supplies are energy efficient, you can easily save a considerable amount of money or fuel while you use them. The savings increase while you use them for a longer period. When you save fuel or electricity, you are again saving on the amounts you spend only on the fuel for heating purposes. Therefore, saving fuel again saves you money in addition to having good effects on the environment and the surroundings.

Sometimes, overheating takes place in heating supplies. This overheating can affect the material of the PEX supplies. Most of the products do not use material which has high resistance to temperature. The good quality heating supplies use good material which is resistant to considerably higher temperatures. Therefore, the material survives under extreme temperature conditions. Therefore, increase in temperature does not hinder their working.

The better technology requires lesser amount of fuel in the heating appliances. The combustion rate of fuel is high. Thus, they utilize the energy from the fuel better. Thus, the same amount of fuel provides more heating effect. Therefore, the efficiency of the heating supplies improves.

Under all conditions, these heating supplies give uniform heat in the required amounts. Moreover, they give better heating effect under all conditions. Thus, you can save a lot of money that you spend on the fuel for the heating supplies or for the bills you pay for the energy that they consume.

Comments Off

By pexpipeman, 12/01/2011

Radiant heating is the most common heating system and it has been used in home from the 1950s. Almost 70% of the homes across the U.S and Europe use this system to keep their homes warm and cozy despite the dipping temperature outside. Radiant heating is a very cost effective method of home heating. It conserves energy because there is no repeated heating of the air in the room. The use of PEX radiant pipes in radiant heating systems has made the home heating system so easy to install and very cost friendly as well.

PEX radiant pipes are made from cross-linked polyethylene and they are durable, flexible and can withstand high temperatures for a good amount of time. The best thing about PEX radiant and radiant heating is that you get the pipes precut and they are very easy to fit within the floor panels. The installation of these pipes does not require any heavy equipment and it is faster in comparison to the installation of a radiant heating system with copper pipes.

If you want the floor to remain warm for longer then you will have to ensure you use high quality PEX radiant pipes in your radiant heating system. The radiant heating systems found in Europe are far more sophisticated than those seen in the U.S because most of the countries in Europe fall in the Arctic zone where the temperature is below freezing for most parts of the year. The radiant heating systems in Europe are very good and they ensure that the homes are warm and comfortable.

Despite the fact that PEX radiant pipes make radiant heating systems cost effective, they also bring down the fuel consumption by nearly 20%. The heating system is considered safe for health and this is another reason why it is grown in popularity immensely. If you are in a room with radiant heating then you will feel that the room temperature is equal to the temperature of your body making it very comfortable. Radiant heating also ensures that your home is free from bacteria, air contaminants, dust and cold spots.

If you are considering installing a radiant heating system in your home then pay very close attention to the quality of  heating pipes used. The floor heating system will not work as effectively as promised if inferior quality PEX pipes are used. PEX pipes are not very expensive and hence the best quality can be used by most people, making the comfort of uniform radiant heating a possibility in every home.

Comments Off

By pexpipeman, 11/16/2011

Are you looking for the best PEX manifold for your radiant heating system? If so, you are probably reading the right article. Here you will find some tips and information that can help you to choose the right manifolds for your radiant heating system. However, before you get into this, it is very important to know what a radiant heating system is. This is also a technique known as Radiant Manifold. The system is mainly used to allocate and gather the water through PEX with beaming heat system. Today, the radiant heating system is used extensively around the world. This is mainly due to the qualities and features of this heating system. The manifolds or multiples play a special role in the radiant heat functions. Therefore, choosing the right PEX manifold is very important.
When you look for heating manifold in the market today, you will find different options in front of you. There are different models such as PEX manifolds, TRuFlow Manifolds, Copper Manifolds, Radiant Heat Manifolds etc available in the market. However, PEX manifolds are considered to be the best. The PEX manifold models are made using brass material. There are different parts attached to it such as a flow mater, balancing valve, mounting brackets, return manifold, an adaptor for the PEX tubing as well as end caps with the drainage pipe. These manifolds are also available in stainless packaging. These manifold models come with flow mater, balancing valve, end caps, ready to use adaptor as well as other amazing features.
A lot of people around the world, who are located in the coldest regions are using radiant heating manifold these days. The system is helping them to sustain the extreme weather conditions with the help of the radiant heat produced by the radiant heating system. If you invest wisely in the radiant heating system, you will be able to enjoy a comfortable living. This will help you to sustain in any extreme climatic conditions without any hassles.
If you look for a PEX manifold for your heating system, you will find different models in front of you. The manufacturers are offering different manifolds to meet various plumbing applications. Therefore, you can choose the right one based on your plumbing project needs. You can install the manifolds with the help of a crimp connection or clamp connection system. Incase, if you are new to this, taking the assistance of a professional will help you.

Comments Off

By pexpipeman, 09/14/2011

Various types of heating systems are available in the market which is being used all across the world. There are a lot of advanced heating supplies and systems for heating that have been introduced in the market with a variety of options. From all of the options, electric heating systems and hydronic floor heating systems are being widely used in this world. It is very essential to make out a comparison between both of these to get the best what is required.

Heating systems that make use of  radiant heating is one of the oldest systems available in the market. These systems are one of the best floor heating systems available in the markets and are much poplar also. Equipments such as hot water heater or a boiler, manifolds, thermostats, wooden or heat transfer plates, PEX tubing and circulator pumps are being used in this type of heating systems. No doubt hydronic heating systems are very famous all over the world but they are much complex also for the installation. A professional and experienced team of people is required for the installation of these heating systems in order to get the best results. There are some challenges that are needed to be faced during the installation such as tubing of hot water.  It needs to be installed where the concrete bed is light and there are some situations when the level of floor is required to be raised.

Some exclusive PEX supply and PEX products have been introduced in the markets that have made the installation much easier in comparison. These equipments and products can be very effective for the installation of the tubes in the panels of pre cut wood for more convenience in future. But it is not appropriate to opt for this system of hydronic heating if you are in need of providing heat in a small area. This is due to the fact that these systems are cost effective, maintenance friendly apart from being complex only for those areas that are larger in space.  Smaller areas can be equipped with some electric radiant heating systems.

These types of systems are very appropriate for the purpose of heating small areas such as kitchens, bathrooms or sunrooms etc. A thermostat and heating cable is used in this system of heating. Moreover, these electric heating systems are much less expansive as compared to hydronic radiant heating systems. These systems can be installed in any way that you would like to and it does not also require any core professionals for the installation. If required, every corner of the house can be covered by this type of heating system.  Cables used in these systems of heating have equal effectiveness as in other systems but the warranty period should be considered as the process of installation also. No doubt these systems are easy to be installed and less expensive also, but people still opt for the installation of hydronic heating systems due to their effectiveness of heating provided. Heating is evenly distributed at every place of the house.

Comments Off

By pexpipeman, 08/16/2011

The ball features a gap, and with the aid of that gap, the valve closes and opens. When that gap inside the ball is positioned in the same direction as the span of the tube, the liquid just flows via the gap, therefore, the valve is open. If the gap is perpendicular with the length of the tube, the liquid cannot pass, thus the valve is closed.

The three-piece valves employ a completely sealing element that is afflicted by fluid pressure, raising additional forces and increasing lifespan. This sort of valves can be manufactured of polypropylene, and they’ve several advantages. They might create junctions with many other systems, they feature an original means of blending which is referred to as the poly-merger and they are generally proof against high temperatures and pressures.

The ball valves are easy enough to go into detail, since they are what their name states, a ball placed into a tube in which the liquid flows. The ball valves are controlled on the surface of the valve, a lot of them with a 90 degree turning handle, in that case causing them to be the correct choice for a shutdown purpose. The key parts of the ball valves’ structure are those that will make them special. One of several aspects that characterize this sort of valves is that it supports temperatures all the way to 200 degrees Celsius and pressures around 700bars.

During the 1950s, the spherical disc valves came to be, and they got the naming of ball valves. You can use them in numerous domains, including petrol industries, chemical plants, water treatment systems, paper making and long transport pipes.

These ball valves are employed as elements in connection with the distribution networks to handle cold and warm water, together with to heat transport networks. Ball valves are certainly not expensive, and they also can be acquired from PEX tubing store.

Comments Off

By pexpipeman, 04/28/2011

The plate and frame heat exchanger has some detail sheets and  ribbed sheets that are perched in a carbon steel frame. There are dishes balanced from the top drive and attached to the bottom of the bar. A weld encloses the liquid conduits that part the liquids in the device. Covers surround the entire heat exchanger unit.

Plate and frame heat exchangers are widely used in industrialized processes, such as food processing, chemicals, nuclear deposits and industrial refrigeration processes. For example, they used to chill the hydraulic oil in sulfuric acid manufacturing metal. It is also used in copper mines and for extremely sticky substances, such as eggs, sauces, honey, or starches, in food processing.

Heat exchangers are necessary and frequently used in heat and electricity, air conditioning and refrigeration, heat recovery, transport and manufacturing industries. This equipment is also noteworthy in electronic cooling and environmental issues such as thermal pollution, waste disposal and sustainable development.

Plate heat exchangers are available in a variety of metal alloys handle highly corrosive liquids. The expansion and addition of services in one easy, because the building. Because of the heat transfer coefficients higher, the space is less than the peel and-tube unit, which reduces the cost of plant construction.

Gaskets that connect the disks are the main weakness of this heat exchanger’s frame. Depending on the speed of the fluid and corrosion, seals can begin to lose, after a period, after the downtime that require maintenance and replacement. Pressure drop in the heat exchanger is high, and this may require the purchase and operating costs and more efficient pumping system. Although the maintenance is easier for a plate heat exchanger, it can still become clogged. This leads to long periods of inactivity.

Comments Off

By pexpipeman, 04/19/2011

If the hot water recirculation system from home needs to be enhanced with a pump of some sort, then deciding which model is best should be a serious job. Many factors should be taken into consideration, starting with the speed of the water flow, its temperature and pressure variations as well as the materials the pump should be made of.

Unlike the ordinary water pumps, Grundfos UP15-10SU7P is designed to match the Comfort System series, which offers all the options in one unit, is facile to install and has an excellent performance. Because of its incorporated motor protector and built-in timer, this pump never fails to do its job.

It may not be a powerful pump, having a maximum of 25W, but because of its versatility and built-in protection, this circulator pump is more dependable than others. In addition, the Comfort System includes the incorporated times and line cord, as well as the valve verifier.

One of the aspects that need to be taken into consideration when thinking of purchasing Grundfos UP15-10SU7P is that this pump model is made out of stainless steel, which decreases its resistance considerably, compared with an iron or bronze one. Subsequently, the temperature range at which it is advisable to be installed is from 4 to 65 degrees Celsius, and the maximum pressure is of 145psi. the low temperature explains the fact that Grundfos up15-10su7p tlc is usually used for cooling systems and other applications that mainly operate with cold water.

In conclusion, Grundfos UP15-10SU7P pump is probably the best choice one can make to purchase for their plumbing system. Not only is it trustworthy and reliable, but the producers also offer a two year warranty for this model, from the day it has been installed in the piping system.

Grundfos USA – Comfort Series Instant Hot Water System Grundfos up15-10su7p TLC Manual.

Comments Off

By pexpipeman, 04/08/2011

Brewing your own beer in the comfort of your back yard has been a part of the American Dream for decades. Nowadays more and more people choose homemade beer over factory beer, not only because of its better taste, but also for the satisfaction they get when producing it at home.

An essential part of brewing is using a chilling device made of copper wort chillers. Using such a heat exchanger is essential in the process of making beer because it helps keep the alcohol levels within normal limits in order to get the right taste.

The heat exchangers used here will most likely be brazed plate heat exchangers. This is a water to water type of heat exchanger that maintains the temperature of the wort at the best possible level. A beer and wort plate chiller also guarantees that the boiling wort is cooled in the right amount of time so that the beer does not lose its flavor.

Boiling is the most important part in brewing the beer. It determines the color and aroma of the magic liquid, so if you are really looking for your friends’ admiration, this is the one step with which you need to be extra careful. Keep in mind that the hot wort must be cooled as soon as possible. It needs to be brought down to a temperature that favors the growth of yeast. If the temperature is too high, the yeast will die off. If it is too cold, the yeast will be rendered inactive.

As a final point, using a heat exchanger in the brewing process is not only highly recommended but also essential to obtaining a tasty, flavored beer that will impress even the most experienced brewers. So get your necessary equipments and start brewing today!