Comments Off

By pexpipeman, 12/16/2011

PEX have many good qualities and added features over other forms of piping. These features make this piping stand out and thus, highly popular for use. One such benefits of this piping is its availability with oxygen barrier. This oxygen barrier makes it useful for a variety of applications. It is not possible to use this piping in these applications without an oxygen barrier.

The oxygen barrier forms an external layer on the objects of the material. As oxygen plays a vital role in the process of corrosion, it can also corrode the external surface of this pipe. The presence of an external oxygen barrier cuts off the external supply of oxygen. Thus, this makes the pipe insulated to oxygen. As a result, the water inside the pip stays safe. Thus, the water is safe for drinking. This is the reason why oxygen barrier pipes are fit fro use for potable water.

In addition to saving the water from the chemical affects of corrosion, this oxygen barrier also prevents the PEX material from corrosion. This material is non-reactive and chemicals do not have much affect on it. However, prolonged exposure can cause decay in the surface and can affect the material. This can lead to initial leakages or even complete damage to the pipe. Therefore, the oxygen barrier increases the life of the pipe and helps it in staying in good condition for longer under different circumstances. Thus, you do not have to replace or repair them frequently. Thus, it saves your repair and replacement cost.

The use of this material with oxygen barrier also makes the use of different components possible for you. You can use other metallic components outside the pipe. This ensures that no oxygen or ferrous material enters the pipe. Therefore, you can use cheaper components if you are using pips wit oxygen barrier. This is one of the cost benefits of oxygen barrier pipes.

The use of oxygen barrier in different fittings also makes the use of these pipes in radiant heating systems simpler. Radiant heating systems require the fitting of pipes under layers of surface. The presence of oxygen barrier prevents it against other substances and reduces leaking and other similar problems. This ensures carefree use of these cables under the surface. Therefore, you can use it for heating the rooms with radiant heat.

Therefore, you can use PEX tubes with oxygen barrier can be useful in many situations.

Comments Off

By pexpipeman, 12/16/2011

No house can be properly built without making the most of the house designs created by the architects. There are many architects out there, who have been well appreciated for creating some amazing house designs. These designs will not only save the space, on the other hand, it will also help you to save good amount of money as well. In some cases, you can just partially construct your house rather than changing it completely. By this, you can customize few areas completely and design them as per your wish using reputed plumbing service providers like PEX plumbing. In fact, you will rarely find the cases where the entire house will constructed without going through the house designs created by architects. Hence, partial construction is the most preferred option when it comes to construction without the guidance of architects.

If your house is not in a condition even for partial construction, then you can just spice up the good look of your house with the help of wooden benches and other simple decors. Also, remember that cheap construction deals will not offer such a great look for your houses. You can construct your house according to the modern trends with the help of architect’s house designs. House is the place where most of the people take a break from their hectic lives and tensions and live together with the family or friends. Hence, there is no doubt, your house must be tip top and soothing by using top plumbing services. House designs  will get your house constructed with modern accessories and hence it finds a solution to add panache to your house. The style and beauty of the house can be enhanced by using contemporary accessories. The modern house accessories are manufactured with the influence of some great techniques. The way that these accessories have been designed will surely guarantee the user with complete comfort and bathing luxury.
The vanities are available in wide varieties that will greatly differ in shapes, sizes, types and colors. Some of the most preferred fashionable accessories for houses are such as mirrors, cabinets, sinks, vanity tops in great designs and styles. Sinks are of course an important part of your houses. Hence, this can be used as a major attraction for your house. Construction your house with house designs can find you the solution in choosing the perfect sink designs. During construction, some uniquely designed faucets are fixed in the counter top of the wall of your house by the PEX plumbing service.

Comments Off

By pexpipeman, 12/16/2011

Radiant energy clearly exhibits great strength as an energy source. Daily lives of people are touched effectively by this energy form, be it while conversing on their cell phones or listening to radios. With the growing scope of its usage, and also the fact that it is derived from a source that is never going to be depleted, radiant heating energy is going to be the buzzword in energy generation in the very near future.
Many people till date might not be aware fully about this form of energy. Radiant heating can be deemed the only form that makes use of electromagnetic waves for energy generation, specifically it’s an energy form invisible to eyes.
Being such a commonly available form, therefore, the question that is asked is how radiant energy is used for solving our energy requirements at homes? For using it as a power source in our homes, we need to be armed with a special generator that could fully use the electromagnetic force and convert the same into energy. This generator is termed Radiant energy generator. Wind power, solar power or any other such waves within the atmosphere can be made use of by these generators for conversion into electricity.
Its main usage these days in our homes is restricted mostly to floor heating systems; however the huge potential that this form of energy possesses has been identified. There is continuous activity on the R & D front to find out how we can further use this energy form in our day-to-day usage. This is mainly driven due to two main factors – depletion of conventional energy sources and the vast availability of the source for this energy form, along with its cost-effective nature.
Radiant heating supply has already made certain impacts in our daily lives – we might not be fully aware of the extent. However, this is going to be the key energy source that has to be used for meeting all our future energy requirements.

Comments Off

By pexpipeman, 12/16/2011

Heat exchangers are the sub devices used for exchanging the heat, as its names suggests. It transfers the heat efficiently from one medium to another. Heat exchangers are generally used in all the devices which can control temperature and humidity of a proper volume space. For example, these are used in chemical and power plants, natural gas processing, in refrigeration, air conditioning or you can say in HVAC industries.

There are many types of heat exchangers depending upon the shells, tubes, wheels, plates and fluid used in them. Few of them are:

Adiabatic wheel type: This type of heat exchanger uses a transitional fluid or solid to store the heat and has the capability of absorbing the heat. Further, the heat stored in transitional state’s fluid or solid moves to the other side of heat exchanger for releasing it.
Examples: Cold fluid adiabatic wheels heat exchangers have a large wheel that consists of threads and these fine threads are rotated by heat.

Plate fin type:  This type of exchangers has the passages which are sandwiched in between. And passages consist of fins. These fins are responsible for more efficiency. The fins have several shapes like offset fin, wavy fins and straight fins.

The fins and plates need to have higher heat transfer rate, so they are made up of metal alloys such as aluminum which makes them more effective.
High heat transmission, resisting extreme pressure, huge amount of heat transfer and lighter in weight are a few advantages of plate fin type heat exchangers.

Shell and tube: This type of heat exchangers contains sequences of PEX tubes or pipe like bodies.  And these tubes are filled with fluid which acts as heat transferring medium. The other tubes used in this may have some different fluid. The second fluid surrounds the tubes which are facing the thermal conditions such as cooling or heating.

Main advantage of this type of heat exchangers is that they can resist very high pressure, around or more than 30 bars. The shape of this heat exchanger is also responsible for resisting high pressure.

Plate type: This is further divided into categories depending upon the number of plates and their gaps between each other. Plate type heat exchangers are used widely in HVAC applications. These are also called as Plate and Frame type heat exchangers. The plate’s arrangements such as number of plates and gap in between them are interrelated with the efficiency of heat absorbing and transferring.

Fluid type: This is the most widely used type of heat exchangers. These are more economical than others. Espresso machines are the most common, which use this type of heat exchangers. In fluid heat exchanger’s process, two simultaneously process are held which improves its working efficiency.

Spiral type: As the name suggests, the shape of these types of heat exchangers is spiral or helical because they look like coils and have different sheets. Whole heat exchanger is divided into channels in which few channels act as reservoir of fluid which exchanges the heat.

Comments Off

By pexpipeman, 12/02/2011

If you are moving into a new house and have a lot of plumbing work to do, you should think of an easier way out to finish the work faster and with less money spent on it. When you look into the market, you will find many plumbing materials like copper and iron tubes. The prices of these materials have grown very high over the past one-year or so. The best alternative for you is to go to a PEX Universe store.

The DIY PEX  are available at a low price and this allows you to go budget shopping. When compared to the other materials like copper and iron, you will be saving half the money from the materials.

They are also available in a range of sizes. You can choose the particular size of do it yourself tube depending upon the place that you want to fix it. The range extends up to 4 inches in diameter.

The best advantage of the do it yourself polyethylene pluming is that you can install it all by yourself, as the name suggests. The installation of the polyethylene tubes is very easy when compared the metal tubes. You will save a lot of money while you install it yourself. The plumbing service does not come cheap and you will have to shell out a lot of money.

With the PEX materials, you do not have to do any soldering. This is because soldering is used only when there is a turn and fitting that you should fix. The flexibility feature of the PEX materials allows to be turned without the use of any fittings most of the times. Thus, the time involved in the installation is very less. While you do not use much of the fittings, you can also expect to have fewer leakages.

If you are on a very low budget, then you can buy the DIY PEX and ask the seller to get the tubes fixed for you. When you buy the whole package from one person, you are entitled to get a better price and more discount. Thus, it would be of good help to look for sellers who also take up the installation process. The local yellow pages will help you in this process of finding a plumbing materials dealer. You can go online and make price comparisons. This way, you will save time and money, which will otherwise go for a waste.

www.pexuniverse.com

Comments Off

By pexpipeman, 12/02/2011

Kickspace heaters are relatively small heaters that can be installed in places that the normally used baseboard heaters cannot reach. The naming has been done because of its ability to fit into very small spaces like the cabinet in your bathroom, small spaces underneath the kitchen or any other similar small spaces that are deprived of heating normally. These heaters, irrespective of the fact that they are smaller in size, deliver creditable performances. The Kickspace heaters are available in two variants – The Electric ones that get connected to the electrical supply and Hydronic (water powered) models that are connectible to the boiler system in your homes and the electric supply. The heaters, with their reach almost anywhere within the household, prove a useful asset in keeping you warm.

Ease of Installation:

These heaters are easily installable; you do not need a diploma in electrical engineering to have the same installed at your home. All you need are basic tools that are usually found in every home and some basic knowledge of electrical appliances. If you have them, the heaters can be easily installed by following the installation guide that accompanies such devices.

Versatility of usage:

The usage of these heaters is generally restricted to your homes, but in certain situations they have been found useful in business operations too. If your nature of work requires you to work within a small confined space, like ticket counters or tool booths, then this heater can prove a more than useful asset for keeping the place warm.

Features:

There have been loads of features that these heaters are found to have; prominent among them are the in-built thermostats on them that gives you the luxury of choosing the temperature at which it has to operate. It is not only powerful (1500 Wattage) and durable but look stylish in their white color grilles.

With nano-technology emphasizing on everything in small sizes, Kickspace heaters indeed seem to be a boon of new technology!

Kickspace heaters as best helper your main heat system

Comments Off

By pexpipeman, 12/02/2011

There are many different heating supplies that contribute together to the increase in comfort and warmth of our interiors. They all make our live more comfortable. These include taco pumps, fire surrounds, hot water cylinders and countless other products. We do not even realize their presence and importance until there is a breakdown in the services of these products. When we use good quality products, they help us in many different ways that we do not even realize. However, if we use poor quality products, they can make things really tough for us. Therefore, I is always important that we install the best quality products anywhere we want them.

There are many factors that make a heating supply effective. The most important thing to consider while buying heating supplies is the quality. You ca get many benefits with the good quality supplies. Even if you spend more amounts on their purchase, you can save money while you use them.

It is always good to save some extra money. If the heating supplies are energy efficient, you can easily save a considerable amount of money or fuel while you use them. The savings increase while you use them for a longer period. When you save fuel or electricity, you are again saving on the amounts you spend only on the fuel for heating purposes. Therefore, saving fuel again saves you money in addition to having good effects on the environment and the surroundings.

Sometimes, overheating takes place in heating supplies. This overheating can affect the material of the PEX supplies. Most of the products do not use material which has high resistance to temperature. The good quality heating supplies use good material which is resistant to considerably higher temperatures. Therefore, the material survives under extreme temperature conditions. Therefore, increase in temperature does not hinder their working.

The better technology requires lesser amount of fuel in the heating appliances. The combustion rate of fuel is high. Thus, they utilize the energy from the fuel better. Thus, the same amount of fuel provides more heating effect. Therefore, the efficiency of the heating supplies improves.

Under all conditions, these heating supplies give uniform heat in the required amounts. Moreover, they give better heating effect under all conditions. Thus, you can save a lot of money that you spend on the fuel for the heating supplies or for the bills you pay for the energy that they consume.

Comments Off

By pexpipeman, 12/01/2011

Radiant heating is the most common heating system and it has been used in home from the 1950s. Almost 70% of the homes across the U.S and Europe use this system to keep their homes warm and cozy despite the dipping temperature outside. Radiant heating is a very cost effective method of home heating. It conserves energy because there is no repeated heating of the air in the room. The use of PEX radiant pipes in radiant heating systems has made the home heating system so easy to install and very cost friendly as well.

PEX radiant pipes are made from cross-linked polyethylene and they are durable, flexible and can withstand high temperatures for a good amount of time. The best thing about PEX radiant and radiant heating is that you get the pipes precut and they are very easy to fit within the floor panels. The installation of these pipes does not require any heavy equipment and it is faster in comparison to the installation of a radiant heating system with copper pipes.

If you want the floor to remain warm for longer then you will have to ensure you use high quality PEX radiant pipes in your radiant heating system. The radiant heating systems found in Europe are far more sophisticated than those seen in the U.S because most of the countries in Europe fall in the Arctic zone where the temperature is below freezing for most parts of the year. The radiant heating systems in Europe are very good and they ensure that the homes are warm and comfortable.

Despite the fact that PEX radiant pipes make radiant heating systems cost effective, they also bring down the fuel consumption by nearly 20%. The heating system is considered safe for health and this is another reason why it is grown in popularity immensely. If you are in a room with radiant heating then you will feel that the room temperature is equal to the temperature of your body making it very comfortable. Radiant heating also ensures that your home is free from bacteria, air contaminants, dust and cold spots.

If you are considering installing a radiant heating system in your home then pay very close attention to the quality of  heating pipes used. The floor heating system will not work as effectively as promised if inferior quality PEX pipes are used. PEX pipes are not very expensive and hence the best quality can be used by most people, making the comfort of uniform radiant heating a possibility in every home.

Comments Off

By pexpipeman, 12/01/2011

Plumbing is one of the most inevitable parts in the residence, office or any other building. It is the main source through which the water can be brought in into the building. Plumbing uses a lot of tubes and pipes. These are made of various materials. In the initial stages, the plumbing was made of metals like copper and iron and later moved on to the use of plastic. It was here that the use of PEX vs copper started. This material was first used for the purpose of plumbing in the year 1930. However this has now become a household name.

PEX is a material which is made of Polyethylene with cross link bonds. It is the cross links that makes these tubes the best in the market. However there is a constant debate of PEX vs copper in the plumbing market. This article will discuss about the pros and cons of these two tubes.

• When we say PEX vs copper it has different implications with respect to the place in which it is used. For example, PEX wins hands down when used in a very cold place with temperatures less than 0degree Celsius. This is because of the insulation that it provides. However, copper cannot be used here as water freezes in this pipe.
• Chlorine resistance is another feature that PEX provides when PEX vs copper is stated. While using plumbing for drinking water, it is very important to make sure that it is chlorine resistant. Most of the copper pipes do not provide this feature making it unsafe for drinking water plumbing.
• When the argument of PEX vs copper crops up, one can say that the PEX is a better option. This is because of the easy installation the PEX tubes provide. With a very few number of fittings, one can easily install these tubes on their own without the help of professionals. Thus it saves a lot of money spent on installation.
• Flexibility is another feature which can be stated for PEX when a PEX vs copper argument is happening. The pipes are very flexible and allow the user to use them at wall corners without the use of connector fittings. This also prevents the unnecessary leakage of water which is very much possible if the connectors are not fixed properly.

Thus one can say that PEX vs copper is a better material than copper for plumbing.

Comments Off

By pexpipeman, 12/01/2011

These days a lot of people are opting for PEX piping. Slowly it is becoming on the best plumbing options on the market. PEX has been doing a great job by providing quality fittings to its customers. Since this system was introduced on the market, it has impressed a lot of people across the globe. The traditional and modern, both kinds of plumbing tools are available.

When it comes to piping, nothing is better than PEX piping. It fulfils all your piping needs, the materials used and the overall installation process is done smoothly, without any hassle.

If you wish to install pipes that will last longer and remain strong and intact for a good number of years then PEX tubing is the only option that can satisfy you. In fact, this is one of the best buys for you.

As far as the performance is concerned, you don’t have anything to worry about. With PEX piping, the quality can never be undermined. You can expect the complete water system to perform flawlessly. The strong materials that are used, it does the trick and makes the installation a success.

In fact, amongst the many that have been using PEX, you can seek reviews from them. The current statistics reveals that this piping system is definitely a worthwhile one. You can be certain and assured that the maintenance problems that you would otherwise face with a not so reliable system, all that can be overlooked if you opt PEX.

The maintenance is not a problem at all. One of the reasons is because of the modern design and usage of materials. If you notice, there are many who are still clinging onto the traditional systems and this is what calls for major maintenance. Therefore, with PEX piping, you don’t have to worry much; the materials used are absolutely meeting the current demands.

If you compare this piping with the regular metal pipes, you can expect resistance to freeze damage, whereas the metal pipes do not offer this. There are in fact quite a few comparisons that can help you identify why it is so important to opt for the best and the best is PEX piping.

If you have been using the regular metal piping, you must shift to PEX piping. There are many pros and cons in regards with these different kinds of piping. However, by all means PEX holds an upper edge.